The equipment bench / 02

ATEM Television Studio
HD8 ISO

Interactive study modelRevision 1.0.1
Photo reconstruction
BUILDING MODEL
Select a control to inspect it
Drag to orbit · Scroll to zoom · A click only selects
individually addressable parts · Approximate geometry · Background MIX practice only
Reference views & scope

What is grounded

Front, rear and side placement follows the four supplied product views. Connector types and hardware counts were checked against Blackmagic Design’s HD8 ISO specifications. FMP labels come from the supplied draft Switcher SOP.

Panel geometry, button travel and lever motion are approximate. Product-photo illumination is not the venue’s current state. No installed firmware, current venue patch or physical equipment readiness is verified.

Practice boundary

Preview, direct Program selection, CUT, AUTO, a manual background MIX, BKGD and video FTB are simulated. Keyers, audio, macros, Aux routing, recording, streaming and shifted banks are described for identification only.

The FMP SOP is a draft. Its source labels are useful context; 7 Ads is the stated operator fallback in the FMP guide; formal approval and downstream routing remain separate pending checks.

Supplied ATEM reference view

Blackmagic technical specifications · Blackmagic getting started

Validation record & component catalog

Revision 1.0.1 · Updated 20 September 2026. Correction: both selected source buttons turn red during a partial MIX, returning to red/green at an endpoint. Based on Dave’s observation.

This production browser release is checked by the repository's model acceptance suite. Physical equipment, installed firmware, venue routing and physical touchscreen hardware require separate acceptance. No device connection occurs.

Component IDs, evidence and geometry status are embedded in this guide.