Blackmagic Design · SWPANELCCU4430 W × 389 D × 141.7 H mm
PHOTO / DOCUMENT RECONSTRUCTION · NO LIVE CONNECTIONClick a component to inspectFMP ROUTES PRESERVE OPEN TRACES
Drag to orbit · scroll to zoom · click only inspects
SIMULATIONHardware model and practice state are local only.
Local simulation / no device connection
Shade four strips without pretending channel 4 drives the PTZ.
FMP channels 1–3 correspond to the three URSA camera chains. Channel 4 is a populated `4 PTZ` strip/configuration slot, but the BirdDog P240 is controlled separately by SuperJoy over VISCA/IP.
Panel state
Select strip
Joystick training
Relative values only. No exposure target or FMP show look is asserted.
Fault-domain exercise
Start with scope. The 2026-09-11 record was a Camera 1-only engineering-control loss while other channels were unaffected.
Choose the observed scope before assigning a fault domain.
Source boundary / revision 1.0.0
ATEM Camera Control Panel · architecture and FMP boundary
Product contract
Physical strips
4
LCDs
4
3-axis joysticks
4
Preview buttons
4
Network
2× GigE BaseT with loop
Service
USB-C firmware
Power
100–240V AC + 12–30V DC redundant · 30W
Envelope
430 × 389 × 141.7 mm
FMP evidence boundary
House-owned and in routine use.
CH1 Camera 1, CH3 Camera 3, CH4 `4 PTZ`; CH2 label unread in the source photo.
CH4 `URSA_G2` readout is treated as a configuration artifact, not a fourth URSA.
No live panel/switcher IPs are embedded.
This is a browser training reconstruction. It does not verify installed firmware, physical wiring or current venue equipment state. Physical hardware acceptance is separate from browser testing.