PHOTO / DOCUMENT RECONSTRUCTION · NO LIVE CONNECTIONClick a component to inspectFMP ROUTES PRESERVE OPEN TRACES
SIMULATIONHardware model and practice state are local only.
No local preset saved.
Model motion respects published pan/tilt envelopes; preset timing is not modeled.
FMP-8 is cleared. Keep the two old symptoms distinct only if the behavior returns, then establish whether it changes at the controller, transport, or camera boundary before assigning cause.
Historical recurrence drill only. FMP-8 is not a current operating restriction.
Control and video are separate. Dave confirms SDI video to Input 4. The camera-side run was seen to the safe-access limit; intermediate landings and the final patch remain untraced. The dashed line is a functional destination, not a verified cable route.
| Envelope | 163 × 199 × 231 mm |
|---|---|
| Sensor | 1/2.5 in CMOS · 8.5 MP |
| Lens | 4.4–88.4 mm · about 20× optical |
| Motion | Pan ±175° · tilt +90° to −30° |
| Video | NDI · HDMI · 3G-SDI |
| Control | NDI Control · VISCA IP · serial VISCA / PELCO D |
| Power | 12 V DC or PoE+ 802.3at |
This is a browser training reconstruction. It does not verify installed firmware, physical wiring or current venue equipment state. Physical hardware acceptance is separate from browser testing.